77
On-Screen Display
Setup
AV NET SETUP WIZARD ( Example: A/V
RECEIVER Setup)
1. Press the SELECT button to start the SETUP
WIZARD.
2. Use the CURSOR PAD ̆ or ̄ to highlight
YES or NO.
3. Press the SELECT button to select “YES”.
(Select YES to setup an A/V Receiver or NO to
setup other devices).
4. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
5. Use the CURSOR PAD ̇ or ̈ to choose the
brand name of your A/V Receiver.
6. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
7. Use the CURSOR PAD ̇ or ̈ to choose the
preset IR Code.
8. Use the CURSOR PAD ̄ to highlight the “
POWER ” Test button.
These On-screen buttons are called “ Soft
Keys ”.
9. Press the SELECT button to pass the Power
command through the IR Mouse and onto the
A/V Receiver ( Repeat steps 7 to 9 until finding
the IR code that will power up the A/V
Receiver. If the A/V Receiver turns ON, then
you have found the correct preset IR code ).
10. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
11. Use the CURSOR PAD ̇ or ̈ to select the TV
Input that connects to the video and audio
output of the A/V Receiver.
12. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
13. Use the CURSOR PAD ̇ or ̈ to select the
A/V Receiver Source if you have connected the
Monitor Out and Optical Out to the A/V
receiver. Select “ Not Connected “ if not used.
14. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
