HP LTO Ultrium 4 drives technical reference manual, volume 2: software integration 7
HP restricted
Related documents
This is one of six volumes that document HP Ultrium drives. This volume provides background
information for driver and application developers. The following products are covered:
• HP LTO Ultrium 4 full-height SCSI tape drives
• HP LTO Ultrium 4 full-height SAS tape drives
• HP LTO Ultrium 4 full-height Fibre Channel tape drives
NOTE: Throughout this manual frequent reference is made to SCSI commands. For more
information on SCSI commands for HP Ultrium drives see volume 3, The SCSI Interface or The SAS
Interface, of the HP LTO Ultrium Technical Reference Manual set. Ordering details are given below.
Documents specific to HP Ultrium drives
• Hardware Integration Guide, volume 1 of the HP LTO Ultrium Technical Reference Manual
• Host Interface Guide, volume 3 of the HP LTO Ultrium Technical Reference Manual
• Specifications, volume 4 of the HP LTO Ultrium Technical Reference Manual
• UNIX, Linux and OpenVMS Configuration Guide, volume 5 of the HP LTO Ultrium Technical
Reference Manual
Please contact your HP supplier for copies.
• The features and benefits of HP Ultrium drives are discussed in the HP Ultrium Technology White
Paper.
• For a general background to LTO technology and licensing, go to
http://www.lto-technology.com
.
Documentation map
The following will help you locate information in the Technical Reference Manual. A reference like
“
1 HW Integration: ch. 7” means Volume 1, Hardware Integration Guide, of the HP LTO Ultrium
Technical Reference Manual, chapter 7.
Drives—general
FC Drives SCSI Drives SAS Drives
Connectors
1 HW Integration: ch. 4 1 HW Integration: ch. 7
Front panel LEDs
1 HW Integration: ch. 3 1 HW Integration: ch. 6
Specifications
4 Specifications
