ENWW 2-13
Connecting to a network (Mac OS)
1 After setting up the HP Jetdirect external print server and a network port on your
computer, start your computer and make sure no applications are running.
2 Insert the Starter CD into your CD-ROM drive. The CD menu runs automatically.
If the CD menu does not run automatically, double-click the CD icon on the desktop, and
then double-click the Setup icon.
3 Click Install Driver.
4 Follow the onscreen instructions.
5 Mac OS 9.1.x and 9.2.x
i When prompted, restart the computer.
ii Select Chooser from the Apple menu.
iii Select hp inkjet xx in the upper-left window of the Chooser window, where xx
represents the version of the current printer driver.
iv Select deskjet 9600 in the right window of the Chooser screen.
v Close the Chooser.
Mac OS X (10.1 and later)
i Open the Print Center, which is located in the Applications\Utilities folder.
ii Click Add.
iii Do one of the following steps:
• If you are using an AppleTalk network, select AppleTalk on the pop-up menu.
• If you are using an IP network, select hp IP Printing on the pop-up menu and then
type the IP address for the printer.
iv If necessary, select the Zone.
vSelect deskjet 9600 from the printer list, and then click Add.
A dot appears beside the printer name, indicating that this printer is now the default
printer.
vi Close the Print Center.
You must install the HP Jetdirect external print server first, then connect the printer to the
network and install the printer software on the computer.
