Lubrication
Figure 24.
Figure 25.
Drive Chain:
Feed Rollers:
Figure 25.
Always disconnect power
to the machine before
lubricating! Failure to do
this may result in serious
personal injury.
Columns/Lead Screws:
Worm Gear:
Chain:
Figure 27 on Page 28
Gear Box:
Figure 24
6.
Note The correct tension for the V-belts is
1
⁄4"
deflection when pushed in the center with moder-
ate pressure. After the first 16 hours of belt life,
retension them, as they will stretch and seat dur-
ing this time.
