Basic American Medical Products, a division of GF Health Products, Inc. www.grahamfield.com 999-0831-190A Service Manual
30
} Maintenance Inspection of All
Components (Receipt of shipment
)
• Make sure all parts/components are included
(Please see page 9 - “Unpacking Your Bed”).
• Check all bed components for obvious damage.
• Inspect the Power Supply Cord for any cuts and/or damage.
• Check to see all actuator cords are routed and connected
properly to the control box.
} Mechanical Inspection of Assemblies
(6 months)
• Inspect all welds on the sleeping surface, frame, and base
assemblies for stress fractures.
• Inspect all fasteners for wear and looseness.
• IMPORTANT: Lubricate all pivot points, actuator/motor
clevis pins, and control arm clevis pins as needed. White
Lithium Grease is recommended.
} Mechanical Inspection of Casters
& Pedal Locking Mechanism
(3 months)
• Check the pedal locking mechanism to make sure it engages
and disengages properly.
• Check the bottom foot pads on the foot end casters, making
sure they are clean of debris and undamaged. Replace if needed.
• Check all casters to ensure that they roll properly and
are unobstructed.
Zenith aps seRies
} Electrical Inspection of Control Box
(6 months)
• Check the external power cord that plugs into the control
box for any chafing cuts or wear.
• Make sure all attaching hardware is securely tightened.
• Check all electrical connections for any wear or fractures.
• Check your external or mounted battery (see page 24)
Replace if needed.
} Electrical Inspection of Pendant
and Staff Control (6 months)
• Check the pendant cord for any chafing, cuts, or wear.
• Check all pendant functions . . .
P Head raises and lowers properly
P Foot raises and lowers properly
P Entire bed raises and lowers properly
P Bed moves to Chair position properly
P Bed moves to Trendelenberg and
Reverse Trendelenberg positions properly
• Check to make sure each button and associated function
work properly (i.e. the head section raises when the Head
Up button is activated).
} Electrical Inspection of Actuators/Motors
(6 months)
• Check the actuator/motor cords for any chafing, cuts, or wear.
• Check the range of movement on all motors to ensure they
do not bind in theFull Up and Full Down positions.
WARRANTY
- 15 Years on Frame
- 5 Years on Motors and Control Box
(longest motor warranty in the industry)
- 3 Years on Other Electronics
The warranties contained herein contain all the representation and warranties with respect to the subject matter
of this document, and supersede all prior negotiations, agreements and understanding with respect thereto.
The recipient of this document hereby acknowledges and represents that it has not relied on any representation,
assertion, guarantee, warranty, collateral contract or other assurance, except those set out in this document.
RECOMMENDED MAINTENANCE AND INSPECTION
