A SERVICE OF

logo

Open as PDF
next previous
12. User Chart Control
12-6
12.3 How to Select Datum
Selection of datum is very important, especially if you manually enter latitude-longitude positions from the control
panel or keyboard or if you use digitizer. If you only use the cursor to add and to modify waypoint locations, then
you could use any datum, although it is recommended to use native datum of the chart.
12.4 How to Select User Chart to use in Monitor Mode
The user chart that is chosen for the monitor mode is indicated next to UserChart in the sidebar. If "UChart" is red
this means that the workstation is currently displaying the user chart for the plan mode. To activate the monitor
mode and choose a user chart for the monitor mode, do the following:
Put cursor here and
roll scrollwheel to
select User Chart in
Monitor mode
User Chart
Monitor
Plan
X
DISP
DISP
(WT)