4. Select the output: Press and release the low resolution Output 7 and Output 8
buttons.
NOTE: The entire set of ties can be canceled at this point by pressing and releasing
the Esc button. The Esc LED ashes once.
ENTER PRESET
1
9
23
8
7
VIDEO O
AUDIO
VIDEO
I/O
COMPUTER/AU
Press and release the Video Output 7 and Output 8 buttons.
The Output 7 and Output 8 buttons blink to indicate that the
selected low resolution video input will be tied to these
outputs.
The Computer/Audio Output 1
and Output 2 buttons blink to
indicate that the selected audio
input will be tied to these outputs.
The Audio button blinks
to indicate that audio is
broken away. The Video
button remains lit.
The Enter LED blinks to indicate
the need to confirm the change.
= Blinking LED
5. Confirm the change: Press and release the Enter button.
ENTER
The Enter LED and all input LEDs and
output LEDs return to the unlit state.
Press the Enter button to confirm
the configuration change.
The current configuration (see figure 15) is now:
Input 12 video tied to output 7 and output 8
Input 12 audio tied to output 1 and output 2
Output
1
2
7
8
Video
Audio
Input
12
Figure 15. Example 4, final configuration
MPX 866 A Media Presentation Matrix Switcher • Operation 30
