A SERVICE OF

logo

Open as PDF
next previous
ISM 482 Integrated Scaling Matrix Switcher • HTML Operation 60
I/O Configuration Page
You can set up the input configurations and the output format on the I/O Configuration page
(see figure 43). Access the Setup page by clicking the I/O Config tab.
Figure 43. I/O Configuration Page
Input Configuration
You can specify the format of each input. The available formats are RGB, RGBcvS
(identified as RGBcS in the drop-down box), YUVi, YUVp, Betacam 50, Betacam 60, HDTV,
S-video, and composite video. Specify the input format as follows:
1. Click in the desired Input Configuration field. A drop-down box appears (see figure 44).
Figure 44. Input Configuration Drop Box
2. Click the desired input format.
3. Click the Submit button.