2.0 Connecting and Charging the Player
2.1 Connecting and Disconnecting the Player from Your Computer
To connect your player to your
computer:
1. Turn the player
ON.
2. Insert the small end of the included USB cable into the
player.
3. Insert the large end into the computer’s USB
port.
The first time you connect the player to your computer; the computer
will
automatically detect it and install any necessary drivers.
To safely remove the player from your
computer:
1. Click the green arrow in the system tray (the area by the clock on
your
task
bar).
2. A list of attached USB devices will be displayed. Highlight the player in
the
list.
3. If asked, click STOP. Windows will display a message when it is safe
to
remove the
player.
WARNING:(Any!USB!device!that!stores!data!(e.g.!flash!drives,!cameras,!and!
media!
players)!sh ould!always!be!disconnected!from !your!computer!using!this!method!
to!
avoid!corrupting!the!stored!
data.
!
!
2.2 Charging the Battery
The player’s battery is recharged while the player is connected to a running
computer.
To charge the battery, please follow these steps:
1. Connect the smaller end of the USB cable into the USB port of the player.
2. Connect the bigger end of the USB cable into an available USB port on
the computer.
3. The computer must be on for most USB ports to charge your battery. You
will not be able to play your device while connected to the computer.
4. To stop charging, simply disconnect the device.
