25
Settings for using a THX Ultra2 compatible subwoofer
Make these settings when “Yes” is selected for the subwoofer in the Speaker Configuration settings.
There is not displayed when “No” selected. (page 18)
1
Select “THX Audio Setup” on the System Setup Menu screen.
2
Press the ENTER button to switch to the THX Audio Setup screen.
3
Select “Boundary Gain Compensation”, then press
the ENTER button.
4
When using a THX Ultra2 compatible subwoofer or subwoofer that
frequency response extends to 20 Hz, select “Yes”. Otherwise select
“No”.
• When “Yes ” is selected
“Boundary Gain Compensation” can be
selected and the compensation set to “OFF”.
• If the bass sound seems too strong
Set “Boundary Gain Compensation” to “ON”.
This activates a circuit that cuts the low
frequencies of 55 Hz and under. Select “ON” or
“OFF” according to how strong you like the
bass sound to be.
5
Press the ENTER button to return to the THX Audio Setup screen.
