23
Setting the channel level
• Use this setting to adjust so that the playback level between the different channels is equal.
• From the listening position, listen to the test tones produced from the speakers to adjust the level.
• The level can also be adjusted directly from the remote control unit. (For details, see page 56.)
• When using both surround speakers A and B, their playback levels can be adjusted separately.
1
At the System Setup Menu select “Channel Level”.
2
Switch to the Channel Level screen.
3
Select “Test Tone Mode”.
4
Select the mode.
Select “Auto” or “Manual”.
• Auto:
Adjust the level while listening to the test tones produced
automatically from the different speakers.
• Manual:
Select the speaker from which you want to produce the test tone to
adjust the level.
Example: When the “Auto” mode is selected
5
Select “Surr. Sp.”, then select the surround speaker(s) from which you want to
produce the test tone (A, B or A+B).
• Surr. Sp.: A
Adjusts the balance of the playback level between the channels when using
surround speaker A.
• Surr. Sp.: B
Adjusts the balance of the playback level between the channels when using
surround speaker B.
• Surr. Sp.: A+B
Adjusts the balance of the playback level between the channels when using
surround speakers A and B at the same time.
The “Surr. Sp.” can only be selected when both surround speakers A and B have
been selected at the “Speaker Configuration” (when both A and B have been
set to “Large” or “Small”).
Select “Test Tone Start”.
6
