DeLonghi ETAM36.365 Manual

Open as PDF

next previous

To display, proceed as follows:

1. Press the MENU/ESC button to enter the menu;

2. Press the scrolling arrow (< or >) (g. 9) until “Statistics”

is displayed;

3. Press the button;

4. By pressing the scrolling arrow (< or >) (g. 9), you can

check:

- how many coees have been made;

- the total number of cappuccinos and milk based coees;

- the total number of litres of water delivered;

- how many times the machine has been descaled;

- how many times the water softener lter has been re-

placed.

5. Press the MENU/ESC button twice to exit the menu.

MAKING COFFEE

Selecting the coee taste

The appliance is set by default to make coee with a standard

taste.

You can also choose one of these tastes:

Extra-mild taste

Mild taste

Standard taste

Strong taste

Extra-strong taste

To change the taste, press the button (g. 10) re-

peatedly until the required taste is displayed.

Selecting the quantity of coee in the cup

The appliance is set by default to make a standard quantity of

coee. To select the quantity of coee, press the

button (g. 11) until the message corresponding to the re-

quired quantity of coee is displayed:

Coee selected Quantity in cup (ml)

MY COFFEE Programmable:

from ≃20 to ≃180

SHORT

≃40

STANDARD

≃60

LONG

≃90

EXTRA LONG

≃120

Customising the “my coee” quantity

The appliance is set by default to automatically deliver 30 ml

of “my coee”.

To modify this quantity, proceed as follows:

1. Place a cup under the coee spouts (g. 12).

2. Press the button (g. 10) until “MY COFFEE”

is displayed.

3. Press and hold the button (g. 15) until the mes-

sage “Program quantity 1 MY COFFEE” is displayed and

coee delivery begins. Release the button

4. As soon as the coee in the cup reaches the required level,

press the button (g. 15) again.

The quantity of coee in the cup set has now been pro-

grammed.

Adjusting the coee mill

The coee mill is set by default to prepare coee correctly and

should not require regulating initially.

However, if after making the rst few coees you nd that the

coee is either too weak and not creamy enough or delivery is

too slow (a drop at a time), this can be corrected by adjusting

the grinding adjustment dial (g. 13).

Please note!

The grinding adjustment dial must only be turned when the

coee mill is in operation.

If the coee is delivered too slowly or

not at all, turn one click clockwise to-

wards “7”.

For fuller bodied creamier coee, turn

one click anticlockwise towards “1” (do

not turn more than one click at a time

otherwise the coee could be delivered a drop at a time).

These adjustments will only be evident after at least 2 cups of

coee have been delivered.

If this adjustment does not obtain the desired result, turn the

dial another click.

Tips for a hotter coee

For hotter coee, you should:

• performarinsecyclebyselectingthe“Rinsing”functionin

the settings menu (page 10)

• warmthecupsbyrinsingthemwithhotwater(usingthe

hot water function);

• increase thecoee temperature inthe settings menu

(page 11);

• Pressthe button to enable the cup warmer (the

symbol is displayed).

Making coee using coee beans

Important!

Do not use caramelised or candied coee beans as they could

stick to the coee mill and make it unusable.

1. Fill the container with coee beans (g. 14).

2. Place under the coee spouts: