A SERVICE OF

logo

Open as PDF
next previous
Back to Contents Page
Biometric Module
Dell™XPS™M1530ServiceManual
Removing the Biometric Module
Replacing the Biometric Module
Removing the Biometric Module
1. Follow the instructions in Before You Begin.
2. Remove the hinge covers and center control cover (see Removing the Hinge Covers and Center Control Cover).
3. Remove the keyboard (see Removing the Keyboard).
4. Remove the display assembly (see Removing the Display Assembly).
5. Remove the palm rest (see Removing the Palm Rest).
6. Remove the two screws that secure the biometric module to the computer base.
7. Remove the biometric module.
Replacing the Biometric Module
1. Replace the biometric module.
2. Replace the two screws that secure the biometric module to the computer base.
3. Replace the palm rest (see Replacing the Palm Rest).
4. Replace the display assembly (see Replacing the Display Assembly).
5. Replace the keyboard (see Replacing the Keyboard).
6. Replace the hinge covers and center control cover (see Replacing the Hinge Covers and Center Control Cover).
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
screw (2)
2
biometric module
3
palm rest (view from below)