A SERVICE OF

logo

Open as PDF
next previous
29
5. Enable the management port with the no shutdown command. You can now telnet to your Topspin
360, or enter the IP address of your Topspin 360 in a Web browser to launch Chassis Manager.
Example
6. Save the configuration to preserve it between reboots.
Example
For the VFrame Evaluation Test Plan, continue to Step c of “Hardware Configuration Steps” on page 14
in the “VFrame Evaluation Test Plan”.
Connect InfiniBand Hosts
This section describes a brief overview for connecting your InfiniBand hosts. For more detailed
instructions, please see the Host Channel Adapter Installation Guide, which is included with your
HCA(s).
Topspin-360(config-if-mgmt-ethernet)# no shutdown
Topspin-360(config-if-mgmt-ethernet)# exit
Topspin-360(config)# exit
Topspin-360# copy running-config startup-config