19
3
Install and Boot the Topspin 360
The following sections appear in this chapter:
• “Introduction” on page 19
• “Prepare the Site for the Topspin 360” on page 19
• “Install Topspin 360 Components” on page 20
• “Rack the Topspin 360” on page 20
• “Attach a Serial Console Cable to a PC or Terminal” on page 26
• “Boot your Topspin 360 and Configure Basic Connectivity” on page 27
• “Connect InfiniBand Hosts” on page 29
• “Manage the Topspin 360” on page 32
• “Viewing and Updating the Software Image on the Chassis” on page 33
Introduction
The sections in this chapter explain how to mount your Topspin 360 in a rack, boot the Topspin 360, and
configure basic services. For advanced configuration information, refer to the Command Line Interface
Reference Guide or the Element Manager User Guide.
Prepare the Site for the Topspin 360
This section provides information that you need to safely and successfully prepare your environment for
your Topspin 360. Read this section carefully before you install your device.
