Transferring Documents
9-9
9
Special Sending/Receiving Features
Canceling the Transfer Settings
Follow this procedure to delete the transfer setup file and cancel the transfer
settings.
1
Open all three one-touch speed dialing panels ➞ press [Data
Registration] ➞ [▼] or [▲] until <3.FAX SETTINGS> appears ➞
press [Set].
If necessary, see steps 1 to 3 of “Setting Up the Machine for Document Transfer,”
on p. 9-3.
2
Press [▼] or [▲] until <6.FILE SETTINGS> appears ➞ press
[Set] ➞ [▼] or [▲] until <5.TRANSFER> appears ➞ press [Set].
If necessary, see steps 4 and 5 of “Setting Up the Machine for Document
Transfer,” on p. 9-3.
3
Press [▼] or [▲] until <3.DELETE FILE> appears ➞ press [Set].
4
Enter the password (up to seven digits) protecting the transfer
setup file using the numeric keys ➞ press [Set].
If you have not previously set a password, proceed to step 5.
The transfer setup file is deleted.
5
Press [Stop] to return to the Standby mode.
➞
➞
Set
Data
Registration
Set
Set
4
1
7
5
2
8
6
3
9
0
Set
Stop
