Setting Up Polling Sending
8-17
8
Using Polling
12
Press [▼] or [▲] until <3.SUBADDRESS> appears➞ press
[Set].
13
Enter an ITU-T subaddress (up to 20 digits) using the numeric
keys ➞ press [Set].
This is the ITU-T standard subaddress. An ITU-T subaddress is a number of up
to 20 digits long which can include spaces, and the symbols and #.
NOTE
• If you make a mistake while entering the subaddress, press (Clear)
➞
enter
the correct subaddress.
•You cannot enter a subaddress that is already in use.
14
Press [▼] or [▲] until <4.TX PASSWORD> appears ➞ press
[Set].
If you do not want to enter the ITU-T password, proceed to step 16.
15
Enter an ITU-T password (up to 20 digits, including , #, and
spaces) using the numeric keys ➞ press [Set].
NOTE
If you register a TX password, it must match the ITU-T password attached to the
other party’s polling request.
➞
➞
➞
➞
Set
4
1
7
5
2
8
6
3
9
0
Set
C
Set
4
1
7
5
2
8
6
3
9
0
Set
