A SERVICE OF

logo

Open as PDF
next previous
Microplate Luminometer Installation and Commissioning
29
3.9 Instrument Configuration
For instrument configuration, select the [Instrument] tab in
Protocol Manager and make the following settings (see
Figure 3-9).
❏ Click <Instrument options...>. The [Instrument Options]
dialog box appears (Figure 3-10).
❏ Select the communication port used in the field [Serial Port]
(COM1 or COM2). In most cases, COM 1 is the proper choice,
rarely COM 2. If you select the wrong communication port, the
error message "The instrument does not respond“ i s
displayed. In this case you must select the other port.
Figure 3-9:
[Instrument] tab
Figure 3-10:
[Instrument Options]
dialog box