A SERVICE OF

logo

PN9108 User Manual
50
4. For OOBC connections, the PN9108's serial port settings and the
computer's COM port settings must be the same. Change the settings in
your dialog box (if necessary), so that they match the PN9108's COM Port
settings (see Modem Connection, page 45, for details), then click OK.
Note: The PN9108's default settings are 115200 bps; 8 Data bits; No
Parity; 1 Stop bit, but you can change the baud rate to something
more suitable to your installation as long as they both match.
5. When the HyperTerminal screen appears, open the File menu and select:
Properties Settings. The following dialog box displays:
pn9108.book Page 50 Friday, December 14, 2007 4:38 PM