A SERVICE OF

logo

Chapter 4. Administration
33
Monitor
Clicking the Device Control Monitor button brings up the Device Monitor
display:
This display shows the power status of your entire installation.
You can see at a glance what the total current load for each of the Stations on
the installation is, as well as the On/Off status of each outlet.
Note: If the No timeout on monitoring function is enabled in the General
Settings dialog box (see page 19), the PN9108 will not time out when
this function is being used.
pn9108.book Page 33 Friday, December 14, 2007 4:38 PM