A SERVICE OF

logo

Chapter 7. The Firmware Upgrade Utility
55
As the upgrade proceeds status messages appear in the Status
Messages panel, and the progress toward completion is shown on the
Progress bar.
To abort the upgrade procedure before it completes, click Cancel.
If you cancel before completion, a dialog box warns you that the
upgrade will not finish and shows the options to proceed or abort the
cancel operation. The Mainboard and OSD firmware may be missing or
corrupted upon rebooting the switch.
To recover from missing or corrupt firmware, see Firmware Upgrade
Recovery, page 56.
Upgrade Succeeded
After the upgrade has completed, a screen appears to inform you that the
procedure was successful
Click Finish to close the Firmware Upgrade Utility
Note: At the completion of the upgrade, the KH2508A / KH2516A restarts