137
137
Work Light WL-3
• Screw the dovetail-adapter to the handgrip.
• Slide the work light into the dovetail-guide and clamp.
• Connect the plug to the “RS”-socket.
• By adjusting the flexible arm, bring the work light into
the desired position. The work light can be turned on
and off with the ring on the lamp head ➪ photo. The
brightness of the work light can be adjusted with the
mechanical aperture.
Heated Eyecup HE-4
The heated eyecup prevents the eyepiece ➪ photo from
fogging in low temperatures e.g. when filming outdoors
in winter.
• Pull the normal eyecup off the eyepiece, then place the
heated eyecup on the eyepiece.
• Plug the heated eyecup with cable KC-42S to the RS-
socket.
• Set the heating level with the toggle switch ➪ photo:
“LO”: low heat output
“HI”: higher heat output.
If the camera and accessories are powered by
battery, it is recommended to switch off the
eyecup-heating during extended breaks in
filming.
HE-4
WL-3
Accessories
