Chapter 5. Upgrading Software
50 Express XRT User Guide 61202.153L3-1
Figure 5-1
Diagnostics Tab
3. Click the button labeled Select File to Download. Select the file
to download to the Express XRT, and click Open.
4. To start the software upgrade, click the Start Download but-
ton.
During the software upgrade, the PWR/LINE LED will no longer be il-
luminated. Only the TD LED will flash during the software upgrade
process. Once the process is complete, the Express XRT will reset.
Figure 5-2
Upgrade Firmware Dialog Box
5. When the software upgrade is complete, a message displays in-
dicating the status of the software upgrade. See Troubleshooting
on page 53 if the software upgrade failed.
6. Close the Express Configuration Wizard when complete.
