3 - 12 Ethernet RMON MultiProbe Module Installation and Operation Guide
Table 3-3 describes the Configuration Values menu options.
Table 3-3. Modify/View Configuration Values Menu
Description
Option Result
1.
Modify/View
network settings
Displays the Modify/View Network Settings menu.
For a description of this menu, refer to the section
Using the Modify/View Network Settings menu.
2.
Autodiscovery
Echo Interval
Displays the Autodiscovery Echo Interval and
enables you to enter a new interval (in seconds)
after which the RMON MultiProbe Module sends
an Internet Control Message Protocol (ICMP) echo
request to the default gateway.
3.
Date
Displays the date and enables you to enter a new
value. Use the format: mm/dd/yyyy. Changes are
saved immediately and cannot be canceled. To
correct an error, re-enter the date.
4.
Time
Displays the time and enables you to enter a new
value. Use the format hh:mm:ss. Changes are
saved immediately and cannot be canceled. To
correct an error, re-enter the time.
5.
Timezone
Displays the time zone and enables you to enter a
new value (for example, EST, GMT).
6.
Modify/View
Serial Port settings
Displays the Serial Port Configuration menu
containing the current serial port settings. For a
description of this menu, refer to the section Using
the Serial Port Configuration menu later in this
chapter.
