display security acl hits 371
Examples — To display a summary of the committed security ACLs on a
WX switch, type the following command:
WX4400# display security acl
ACL table
ACL Type Class Mapping
---------------------------- ---- ------ -------
acl_123 IP Static Port 2 In
acl_133 IP Static Port 4 In
acl_124 IP Static
To view a summary of the security ACLs in the edit buffer, type the
following command:
WX4400# display security acl editbuffer
ACL edit-buffer table
ACL Type Status
---------------------------- ---- --------------
acl_122 IP Not committed
acl_132 IP Not committed
acl-144 IP Not committed
See Also
■ “clear security acl” on page 366
■ “display security acl info” on page 372
■ “set security acl” on page 380
display security acl
hits
Displays the number of packets filtered by security ACLs (“hits”) on the
WX switch. Each time a packet is filtered by a security ACL, the hit
counter increments.
Syntax —
display security acl hits
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — For MSS to count hits for a security ACL, you must specify hits
in the set security acl commands that define ACE rules for the ACL.
