display ip telnet 125
display ip telnet Shows information about the Telnet management port.
Syntax —
display ip telnet
Default — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command shows the status and port number
for the Telnet management interface to the WX switch:
WX4400> display ip telnet
Server Status Port
----------------------------------
Enabled 23
Table 32 describes the fields in this display.
See Also
■ “clear ip telnet” on page 112
■ “display ip https” on page 121
■ “set ip https server” on page 139
■ “set ip telnet” on page 146
■ “set ip telnet server” on page 146
display ntp Shows NTP client information.
Syntax — display ntp
Table 32 Output for display ip telnet
Field Description
Server Status State of the HTTPS server:
■ Enabled
■ Disabled
Port TCP port number on which the WX switch listens for Telnet
management traffic.
