Filter
Top Products
MX49/MX61 Owner’s Manual
Quick Guide
31
Changing the Insertion Effect of
the Voice (Voice Edit)
You can edit parameters of the Voice assigned to each
Part. The Voice parameters are in the Voice Edit displays
(those having “Voice” or “DrumKit” indications in the
display names). In this example, we’ll change the
Insertion effect settings.
1 Press [EDIT].
2 Press the Cursor [ ] button to select
“02:Part,” then press [ENTER].
The Part Edit display is called up.
3 Press a Category button to select the desired
Part.
The selected Part number is shown in the upper left of
the display.
4 Press the Cursor [ ] button to select
“01:Play Mode,” then press [ENTER].
5 Use the Cursor [ ]/[ ] buttons to select
“InsSw,” then rotate the [DATA] dial to set the
parameter to on.
NOTE This instrument features four Insertion Effects, which
can be applied to up to four Parts of the Performance.
6 Press [EXIT], then use the Cursor [ ]/[ ]
buttons to select “05:Voice Insert Eff”/
”06:Drumkit Ins Eff.” Finally, press [ENTER].
The Insertion effect display of the Voice Edit is called
up.
7 Press the Cursor [ ] button repeatedly if
necessary to call up the 1st page, then use
the Cursor [ ]/[ ] buttons and the [DATA]
dial to change the effect type.
8 Press the Cursor [ ] button to call up the 2nd
page, then select a preset for the Effect
parameters of the selected Effect type.
Each preset type contains optimum settings for
various parameters, letting you select a general “feel”
you want and have the parameters set accordingly.
NOTE You can also edit each effect parameter in the 3rd or
later pages. For details about each parameter, see the
“Synthesizer Parameter Manual” PDF document.
9 If you want to change the Insertion effect of
another Part, press a numbered Category
button to select the desired Part (as in step 3
above), then follow steps 4 to 8 again after
pressing [EXIT].
NOTE You can also change Parts by pressing a numbered
Category button on the Insertion effect display of Voice
Edit.
EDIT
02:Part
Part01*PlayMode
d
**********InsSw=*on
2
Part01
d
05:Voice*Insert*Eff
2
Part10
d
05:Drumkit*Ins*Eff
2
Voice*Insert*Eff
a
***MSC:*Damper*Reso
2
Effect category Effect type
Voice*Insert*Eff
d
Preset=*******Basic
2