Filter
Top Products
MX49/MX61 Owner’s Manual
18
Playing the Voices
The MX49/MX61 consists of 16 Parts. Voices, which are
the basic sounds and building blocks of the MX49/MX61,
are assigned to each Part. After the instrument is turned
on, the top display which appears shows the Voices of
only Parts 1 and 2. With the default settings, playing the
keyboard will sound only the Voice for Part 1. Select the
desired Voice from the various preset Voices and play it.
Top display
Selecting a Voice for Part 1
The Voices of the MX49/MX61 are conveniently divided
into specific categories, each based on a general
instrument type or sound characteristic. In order to select
a Voice, first select a category.
Here, you’ll learn how to change Voices and play a Voice
while Part 1 is selected.
NOTE For lists of the Voices and categories, see the “DATA LIST”
PDF document.
1 Press the desired Voice Category button.
2 Rotate the [DATA] dial to select the desired
Voice in the selected category.
3 Play the keyboard.
4 Repeat steps 1 – 3 to play the various Voices.
Quick Guide
HINT
The instructions of the “Playing the Voices” section
assume that you are starting from the top display
with the default settings immediately after turning
this instrument on. If the instrument is in a different
status, or for some reason you cannot return to the
top display with the default settings, simultaneously
hold down [SHIFT] and press [SELECT]. This is the
Quick Reset function and allows you to return
operation to the same top display as when the
instrument is first turned on.
NOTICE
Executing the Quick Reset function above erases any
edited data. Be sure to store important data to internal
memory (page 33).
NOTE For details about this function, see the “Shift Function
List” (page 39).
STR:081:Amb
*
Pizza
AP 001:CncrtGrandc
001:CncrtGrandcAP
Voice for Part 1
Voice for Part 2
Voice
Category
Cursor indicates that Part 1 is selected
Voice number Voice name
+
KB
STR:081:Amb
*
Pizza
001:Vintage'74c
Category of Part 1 is changed.
KB
STR:081:Amb
*
Pizza
004:Soft*Casec
Voice for Part 1 is changed.