Filter
Top Products
Setting Up
MG12/4FX
23
Setting Up
Setup Procedure
Before connecting to microphones and instruments, be
sure that all devices are turned off. Also be sure that all
of the mixer’s channel faders and master control faders
are set all the way down.
For each connection, connect one end of the cable to
the relevant microphone or instrument and connect the
other end to the appropriate input jack on the mixer.
Where an input channel provides both a MIC
INPUT jack and a LINE INPUT jack, you may use
either one of these jacks but you may not use both
at the same time. Please connect to only one of
these jacks on each channel.
To avoid causing damage to speakers, power up the
devices in the following order: Peripheral devices →
mixer → power amps (or powered speakers).
When shutting the system down, turn off the power
in the opposite order: Power amps (powered speak-
ers) → mixer → peripheral devices.
Setup Examples
■ Home Recording
1
2
NOTE
3
NOTE
Rhythm
Machine
Effector
Effector
Effector
Synthesizer
MTR
Guitar
Powered Monitor
Speakers
Master Recorder
(MD, CD-R, DAT, etc.)
Sound Source (CD, MD, DAT,
Cassette, Video etc.)
Personal Computer
MTR
Microphone
Headphones
Foot Switch
(YAMAHA FC5)