Yamaha DGX-230 Musical Toy Instrument User Manual


 
88 DGX-230/YPG-235 Owner’s Manual
Accessory CD-ROM Installation Guide
Installing the driver in Windows 2000
1
Start the computer and use the “Adminis-
trator” account to log on to Windows
2000.
2
Select [My Computer] [Control Panel]
[System] [Hardware] [Driver Sign-
ing] [File Signature Verification], and
check the radio button to the left of
“Ignore—Install all files, regardless of file
signature” and click [OK].
3
Insert the included CD-ROM into the CD-
ROM drive.
A start window will appear automatically.
4
First, make sure the POWER switch on the
MIDI device is set to OFF, then use a USB
cable to connect the MIDI device to the
computer. After making the connections,
turn on the power of the MIDI device.
The system automatically launches the
Found New Hardware Wizard. Click [Next].
(Some computers may take a while to dis-
play the Wizard window.)
Otherwise, refer to “Troubleshooting” in the
“Accessory CD-ROM Installation Guide” sec-
tion of the Owner’s Manual.
5
Select the radio button for “Search for a
suitable driver for my device [recom-
mended]”, then click [Next].
6
Check the “CD-ROM drives” check box,
deselect all other check boxes, then click
[Next].
7
Deselect the “Install one of the other driv-
ers”, then click [Next].
8
When the installation is complete, the
Wizard displays “Completing the Found
New Hardware Wizard”.
Click [Finish]. (Some computers may take a
while to display the Wizard window.)
9
Restart the computer.
The USB-MIDI driver installation is complete.
Installing the driver in Windows XP
1
Start the computer and use the “Adminis-
trator” account to log on to Windows XP.
2
Select [Start] [Control Panel]. If the
control panel appears as “Pick a cate-
gory”, click “Switch to Classic View” in
the upper left of the window.
All control panels and icons will be displayed.
3
Go to [System] [Hardware] [Driver
Signing Options] and check the radio but-
ton to the left of “Ignore” and click [OK].
4
Click the [OK] button to close System
Properties, and then click “X” in the upper
right of the window to close the Control
Panel.
5
Insert the included CD-ROM into the CD-
ROM drive.
A start window will appear automatically.
6
First, make sure the POWER switch on
the MIDI device is set to OFF, then use a
USB cable to connect the MIDI device to
the computer. After making the connec-
tions, turn on the power of the MIDI
device. The system launches the Found
New Hardware Wizard automatically.
Otherwise, refer to “Troubleshooting” in the
“Accessory CD-ROM Installation Guide” sec-
tion of the Owner’s Manual. If the system dis-
plays “Found New Hardware” in the lower right
corner, wait until Wizard window is displayed.
(Some computers may take a while to display the
window.)
If the Wizard window prompts you to specify
whether or not to connect to Windows Update,
select the radio button for “No, not this time”,
then click [Next].
7
Select the radio button for “Install the
software automatically (recommended)”,
then click [Next].
8
When the installation is complete, the
Wizard displays “Completing the Found
New Hardware Wizard”.
Click [Finish]. (Some computers may take a
while to display the Wizard window.)
9
Restart the computer.
If the system displays “Found New Hardware” in
the lower right corner, wait until the Wizard win-
dow is displayed. (Some computers may take a
while to display the Wizard window.)
The USB-MIDI driver installation is complete.
If the system prompts you to insert the Windows CD-ROM during
detection of the drivers, point to the “USBdrv2k_” folder (e.g.,
D:\USBdrv2k_) and continue the installation.
NOTE
If the Wizard panel informs you that “The software you are about to
install does not contain a Microsoft digital signature”, click [Yes].
NOTE
If during the installation the system displays “...has not passed Win-
dows Logo testing to verify its compatibility with Windows XP”, click
[Continue Anyway].
NOTE