Filter
Top Products
14 Other changes
In the previous software version, the Global Paste function
enabled you to select up to 100 scenes at a time. However, this
limitation has been removed. However, if you select 101 or
more scenes to paste, you will not be able to use the Undo
function. In this case, back up all important data using the
Select All function, then execute the Global Paste function.
In the previous software version, you could select WITH MIX
SEND only when the ALL parameter was selected in the CH
COPY screen for the Output CH View function. In the version
2.0 software, you can select WITH MIX SEND even if ALL is
not selected.
The MY8-DA96 card is now supported, and you can display
and edit the contents of the card using the CS1D or PM1D
Manager.
Any data created in System Software version 2.0 (such as
scenes, libraries, setup data, etc.) cannot be loaded to a unit
that runs System Software version 1 (i.e., all versions prior to
version 2.0). However, any data created in System Software ver-
sion 1 can be loaded to a unit that runs System Software ver-
sion 2.0.
No limitation in multiple selections for
the Global Paste function
Selecting WITH MIX SEND in the CH
COPY screen
Support for the MY8-DA96 card
Compatibility of created data