Safety
iv 975-0213-01-01
-
WARNING: Fire hazard
Never allow jump-start cables’ red and black clamps to touch each
other or another common metal conductor. This could cause damage
to the unit and/or create a sparking/explosion hazard. Always
disconnect the jump-start cables from the unit after use and clip the
plastic guard over the jump-start cable port.
WARNING: Fire hazard
Jump-start cable clamps must be connected positive to positive (red
clamp to battery “+”) and negative to negative (black clamp to
battery “–”). A reverse polarity connection (positive to negative) may
cause damage to the unit and/or create a sparking/explosion hazard.
WARNING: Fire hazard
The jump-start feature is designed for short term operation only—
less than 4 seconds. Operating the jump-start feature for more than 4
seconds may cause damage to the unit. Allow the XPower
Powerpack to cool down for at least 3 minutes after each jump-start.
WARNING: Risk of explosion, fire or burns
The battery terminals exposed at the jump-start cable port have
enough energy present to cause a spark, creating an explosion hazard,
or to cause burns if a metal object contacts both terminals. Always
clip the plastic guard over the port when not in use.
WARNING: Limitations on use
The XPower Powerpack is not intended for use in connection with
life support systems or other medical equipment or devices.
CAUTION
Do not connect any AC appliance with the neutral conductor
connected to ground to the XPower Powerpack.
CAUTION
Do not expose the XPower Powerpack to temperatures over 40 °C
(104 °F).