Filter
Top Products
Replacing the Incandescent Light
975-0213-01-01 31
Once the connector is inserted into the AC charger input
socket and the solar panel is placed in the sun, the XPower
Powerpack charges automatically just as with the AC charger.
See “Recharging with the AC Charger” on page 27.
It takes about ten hours in direct sunlight to recharge the
XPower Powerpack from a 2.5 A solar panel.
Replacing the Incandescent Light
To replace the light bulb:
1. Turn the light switch off.
2. Pop out the plastic lens cover.
3. Gently grasp the bulb and twist clockwise to unscrew the
bulb.
4. Insert a replacement bulb of the same type and rating into
the light reflector assembly.
5. Gently grasp the bulb and twist counter-clockwise to
screw the bulb in.
6. Snap in the lens cover.
Replacing the External Fuse
The replacement fuse must be rated at 250 A, 32 V DC. See
page 9 for the fuse location.
To replace the external fuse:
1. Remove the fuse cover.
2. Unscrew the two bolts on the fuse.
3. Replace the fuse. Ensure that the replacement fuse is
rated at 250 A, 32 V DC and is of the same type.
4. Tighten the fuse with the two bolts.
5. Replace the fuse cover.