Filter
Top Products
4. Troubleshooting
Please verify the following points before trying to use the Waves
software on the APA44-M unit:
1. The DC power cable is properly connected to the APA44-M.
2. The AC power cable is properly connected to the power adapter
and to the mains. The power adapter’s green LED is on.
3. Network connections:
a. A crossed network cable is connected between the
APA44-M and the host computer – in the case of
connecting a single APA44-M directly to the host
computer.
b. A standard network cable is connected between the
APA44-M and an Ethernet switch. The switch is connected
with a standard network cable to the host computer – in
the case of connecting several APA44-M units to the host
computer.
4. The APA44-M is switched on (by pressing the power button at the
front) and the power LED is illuminating.
In case it is necessary to restart the APA44-M unit, press and hold the
power button for a few seconds to switch the unit off, and then press it
again to switch the unit on.
7