Filter
Top Products
3. Operation
Once the APA44-M unit is connected to power and to the network,
simply press the power button on the front panel to switch the unit on.
The power LED will illuminate to indicate that the unit is operating.
The APA44-M is now ready to communicate with your host computer.
To switch the APA44-M unit off, press and hold the power button on
the front panel for approximately 4 seconds. The power LED should
switch off to indicate that the unit is off.
Before switching the APA44-M off, make sure that the Waves software
is not running on it (as explained in the software manual).
6