Filter
Top Products
89
Setting up your TV
Using the HDMI® settings feature
2 Highlight Enable HDMI CEC Control, and then press the
ENTER button.
3 Select On, and then press the ENTER button.
If you select Enable HDMI CEC Control Off, the other items will be
grayed out.
4 Press the ▲/▼(arrow) buttons to highlight the HDMI
®
CEC
Setup item you want to use, and press the ENTER button,
follow by ▲/▼(arrow) buttons.
v TV Auto Power: On/Off
v Auto Standby: On/Off
v Amplier Control: On/Off
v Initial Speaker Setting: TV/ Receiver
Using the HDMI
®
settings feature
HDMI
®
1(or 2) RGB Range
You can select RGB range of HDMI inputs from the following
modes, as described below:
1 From the Options menu, highlight Input Options, and then
press the ENTER button.
2 Highlight HDMI 1(or 2 ) RGB Range and then press the
ENTER button.
3 Press the ▲/▼(arrow) buttons to select Auto, Full, or
Limited, and then press the ENTER button.
Mode Description
Auto(default) Adjusts RGB full range signal automatically.
Full RGB input signal is displayed in the range from 0 to 255.
Limited RGB input signal is displayed in the range from 16 to 235.
The HDMI
®
setting (RGB Range) needs proper HDMI
TM
source
devices. If your HDMI
®
source device does not support these
features, the TV may not work properly when this feature is enabled.
HDMI
®
Information Display
Viewing the HDMI
®
signal information:
1 From the Options menu, highlight HDMI Information
Display, and then press the ENTER button.