The First Years 1450 Car Seat User Manual


 
12
Section 6 - Selecting A Vehicle Seating Location
5
.
Vehicle Seat Belt Systems:
Use only the vehicle’s lap and shoulder
belt, lap belt or LATCH system
when restraining this Infant Seat.
Design and operation of vehicle seat
belt systems vary from vehicle to vehicle
and from seating location to seating
in the same vehicle. Not all vehicle seat
belts betls can be used with a child
restraint. Refer to the information in this
section information on the various types
of vehicle seat belt systems.
Lap and
Shoulder Belt
YES
This type of belt system has a latch plate
that will not allow the lap portion of the
belt to loosen once it is buckled. The belt
is tightend by pulling hard on the shoulder
portion of the vehiclebelt while pushing
down on the restraint.
LAP SHOULDER BELTS
Combination lap-shoulder belt with
locking latch plate
Combination lap-shoulder belt with
sliding latch plate
This type of belt system has a latch plate
that allows the belt to slide through even
when it is buckled. Many vehicles with
this type of seat belt system can be
locked by pulling all the seat belt webbing
out. Refer to your vehicle owner’s manual
for details on switching the retractor from
ELR mode to ALR mode.The belt is tightend
by pulling hard on the shoulder portion of the
vehicle belt while pushing down on the restraint.
Press
Press
YES
Lap Belt Only