Filter
Top Products
50
Seating Motor Brushes
You have two (2) options for seating motor brushes (Steps 5
to 11):
Option 1
Run the SS/CS Series hopper loader at 50% to 75% voltage for about
30 minutes.
Apply power from a variable transformer at the motor disconnect, not
at the control box.
Option 2
Connect two (2) SS/CS Series hopper loader motors in series and run
them for about 30 minutes.
! WARNING
On motors using white AMP disconnects,
make sure power is not applied to the green
ground wire; otherwise, the motor housing
becomes electrically “hot.”
Reducing line voltage may be accomplished
by using a variable transformer or by
connecting two identical motors in series.