Filter
Top Products
STEP 4: Refer to illustration 4. Screw the two FLUTED LEGS(28) onto the threaded connectors on both
sides of one of the threaded connectors. Screw the other four LEGS(7) onto the threaded connectors on the rail
frame.
STEP 5: Place the trampoline in the normal use position. Slide the HANDRAIL SUPPORTS(19) onto the
two FLUTED LEGS(28) as shown in illustration 5. Press the LEG CAPS(8) on the FLUTED LEGS(28).
5.4.
ASSEMBLY INSTRUCTIONS
STEP 6: Insert both ends of the TOP HANDRAIL(14) into the
LEFT and RIGHT HANDRAILS(17, 18) and lock with the
BUTTON PINS(15). Make the holes in the LEFT and RIGHT
HANDRAILS(17, 18) face toward the trampoline. Insert the
LEFT and RIGHT HANDRAILS(17, 18) into the HANDRAIL
SUPPORTS(19) and lock in position with the ADJUSTMENT
KNOBS(21).
NOTE:
6.
Marks
Button Pin(15)
The SAFETY PAD(6) must be securely attached to the frame before using the trampoline.
It must be properly positioned as shown in illustration 6.
CORRECT PLACEMENT OF
SAFETY PAD
There are marks on the LEFT and RIGHT HANDRAILS
(17, 18) to help to set the height of the handrail.
STEP 8: Post the USE INSTRUCTIONS SIGN(26) in a highly
visible and safe location. The USE INSTRUCTIONS SIGN(26)
shall be placed such that it will be readily visible to the intended
viewer.
8
STEP 7: Stand on the trampoline to make all LEGS(7),
FLUTED LEGS(28), and HANDRAIL SUPPORTS(19) set flat
on the floor. Install and tighten all four LOCKING KNOBS(22)
to lock the HANDRAIL SUPPORTS(19) in position.
WARNING:
!