Filter
Top Products
XL-MP15H AUS 01-16.fm
13
2009June11
Timer and sleep operation
Before setting timer:
Checking the timer setting:
Cancelling the timer setting:
Press the SLEEP button for 2 seconds. The “ ” indicator disappear
and the display show “TMR-OFF”.
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, press the SLEEP button for 2 seconds.
The “ ” indicator light up and the display show “TMR-ON”.
Notes:
● After selecting the playback source, when press the
CLOCK/TIMER button to confirm, “SOURCE” will appear and
blink for 2 seconds, then change to last function.
● When the preset time is reached, playback will start at current
setting if no selected playback source is made.
● The volume cannot be preset during timer setting.
■ Timer playback
1 Check that the clock is set to the correct time (refer to page 7).
If it is not set, you cannot use the timer function.
2 For timer playback, load the disc to be played back.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button for about 2 seconds.
3 Within 10 seconds, press the CLOCK/TIMER button.
4 Press the PRESET ( or ) button to set hour then press the
CLOCK/TIMER button.
5 Press the PRESET ( or ) button to set minute and then
press the CLOCK/TIMER button.
6 Switch input with the PRESET ( or ) button to select
“TMR-OFF” and then press the CLOCK/TIMER button.
7 Press the PRESET ( or ) button to set hour and then press
the CLOCK/TIMER button.
8 Press the PRESET ( or ) button to set minute and then
press the CLOCK/TIMER button.
9 To select the timer playback source, switch input with PRESET
( or ) button to select “SOURCE”.
AUDIO IN
AUDIO IN
PRESET
PRESET
10 To select CD, press the / (CD / ) button and then press
the CLOCK/TIMER button.
11 To select TUNER, press the TUNER (BAND) button and then
press the CLOCK/TIMER button.
12 Select a station by pressing the PRESET ( or ) button and
then press the CLOCK/TIMER button to set the station selected.
OR
13 To select a preset channel number, press the PRESET ( or
) button and then press the CLOCK/TIMER button.
14 The “ ” indicator lights up and the unit is ready for timer
playback.
15 Press the ON/STAND-BY button to enter the power stand-by
mode. Press the CLOCK/TIMER button to confirm the timer
setting.
16 When the preset time is reached, playback will start. “ ”
indicator will blink to show timer playback.
17 When the timer end time is reached, the system will enter
the power stand-by mode automatically.
1 Press the CLOCK/TIMER button repeatedly to view as follow:
OR