Filter
Top Products
IG-520-BH-2 5/25/07
WARNING: ELECTRIC SHOCK HAZARD
Do not plug cord into electrical outlet before connecting power cord wires to terminal block.
9. Make sure to connect wires in correct location by matching color to correct screw location:
※ Open cover on top side of ceiling panel to see three unconnected power wires (Picture 1)
※ Insert the green wire into “〒” and tighten the screw (Picture 2)
※ Insert the black wire into “L” and tighten the screw (Picture 3)
※ Insert the white wire into “N” and tighten the screw (Picture 4)
※ Visually inspect to ensure the correct connections by color (Picture 5)
10．The power cord is located at the bottom of the back panel. Simply plug into appropriate
household outlet when ready to use the sauna. Notice the plug type of your sauna room:
Sauna models IG-510 & 520 & 570 have a 15 amp/120-volt plug; Models IG-530 & 540 &
580 have a 20 amp/120-volt plug.