Filter
Top Products
IG-520-BH-2 5/25/07
INSTALLATION OF SAUNA ROOM BODY
1. Place the floor panel in the desired location on a level surface (Note: The floor panel must be
level before installing wall and ceiling panels. If the surface is not level you may need to
shim the bottom panel to get level.)
※ Make sure lines/grooves of the flooring of the floor panel are parallel with the front wall.
2. Place back panel in the slot of floor panel.
3. Place the left side panel in the slot of floor panel.
4. Place the right side panel in the slot of floor panel.