Sanus Systems ELM701 Baby Carrier User Manual


 
6901-002026 <02>
11
2-2
If you are attaching the anti-tip strap to wood furniture:
1. Locate a secure area near the top of the furniture that is at least 26 mm (1 in.) thick.
2. Drill pilot hole to a depth of 26 mm (1 in.) using a 2.4 mm (3/32 in.) diameter drill bit.
3. Place the mounting plate (P) over the drilled hole on the back of the furniture. Insert and tighten screw [06].
CAUTION:
To avoid potential injuries or property damage!
Ù Ensure mounting plate (P) is securely fastened to the furniture.
Ù Ensure all straps (S) are tight.
CAUTION:
1
2
3
(S)
(P)
[06]
(P)
(S)
(S)
2.4 mm
(3/32 in.)