Filter
Top Products
Switchable RetractorsSwitchable Retractors
Switchable RetractorsSwitchable Retractors
Switchable Retractors
This type of seat belt system stays loose during normal driving. However, they
have special retractors which allow use with child restraints. Read your vehicle
owner’s manual and look for a label on the vehicle seat belt.
Note:Note:
Note:Note:
Note:
Not all vehic Not all vehic
Not all vehic Not all vehic
Not all vehic
lele
lele
le
belts with switchable retractors have instructions for securing child restraintsbelts with switchable retractors have instructions for securing child restraints
belts with switchable retractors have instructions for securing child restraintsbelts with switchable retractors have instructions for securing child restraints
belts with switchable retractors have instructions for securing child restraints
on the vehicle belt.on the vehicle belt.
on the vehicle belt.on the vehicle belt.
on the vehicle belt.
1. Pull the vehicle belt all the way out.
2. Follow steps 1-6 in the directions for manually adjusted belts.
3. Check to ensure the vehicle belt is securely locked by pulling slowly on the
shoulder portion of the belt. It should remain locked. If it is not locked, allow
the car seat belt to fully retract and repeat.
Lap/Shoulder Belt with BucLap/Shoulder Belt with Buc
Lap/Shoulder Belt with BucLap/Shoulder Belt with Buc
Lap/Shoulder Belt with Buc
kle kle
kle kle
kle
TT
TT
T
ongue thatongue that
ongue thatongue that
ongue that
Slides FreelSlides Freel
Slides FreelSlides Freel
Slides Freel
y Along Seat Belt y Along Seat Belt
y Along Seat Belt y Along Seat Belt
y Along Seat Belt
WW
WW
W
ebbingebbing
ebbingebbing
ebbing
1. Place the vehicle lap belt over the Sit’n’Stroll
™
and position it through the rear facing vehicle-
belt tabs. Click the latch plate into the buckle.
2. Push down firmly on the Sit’n’Stroll
™
to sink it
into the car’s seat cushion, while pulling on the
shoulder part of the lap/shoulder belt. You may
have to press on one armrest at a time to get
the auto belt tight. Pull the seat belt as tight as
possible across the unit.
3. Hold the lap and shoulder belts together behind
the latch plate . Unbuckle the belt while holding
the belts together.
Free sliding lap/shoulder belts have a free sliding latchFree sliding lap/shoulder belts have a free sliding latch
Free sliding lap/shoulder belts have a free sliding latchFree sliding lap/shoulder belts have a free sliding latch
Free sliding lap/shoulder belts have a free sliding latch
plate that does not locplate that does not loc
plate that does not locplate that does not loc
plate that does not loc
k to the belt.k to the belt.
k to the belt.k to the belt.
k to the belt.
When placing theWhen placing the
When placing theWhen placing the
When placing the
Sit’n’Stroll™ in seating positions equipped with thisSit’n’Stroll™ in seating positions equipped with this
Sit’n’Stroll™ in seating positions equipped with thisSit’n’Stroll™ in seating positions equipped with this
Sit’n’Stroll™ in seating positions equipped with this
system, you must use a locking clip to prevent thesystem, you must use a locking clip to prevent the
system, you must use a locking clip to prevent thesystem, you must use a locking clip to prevent the
system, you must use a locking clip to prevent the
seatbelt from slipping, unless it has aseatbelt from slipping, unless it has a
seatbelt from slipping, unless it has aseatbelt from slipping, unless it has a
seatbelt from slipping, unless it has a
ss
ss
s
witcwitc
witcwitc
witc
habhab
habhab
hab
le retractorle retractor
le retractorle retractor
le retractor
..
..
.
1414
1414
14