Filter
Top Products
Step 5.
You are now ready to do the Final Adjustment to fasten your gate firmly in the
doorway. Start by turning the BOTTOM Adjustment Wheels FIRST. Continue to
turn the lower Adjustment Wheels counter-clockwise until the Adjustment Wheels are
firmly against the ends of the frame tubes. . IMPORTANT: There should be equal
space on each side of the gate. To easily determine this look at the length of threaded
rod is that is showing on each side. If the gate is centered, there will be an equal
length of threaded rod showing. If more threaded rod is showing on one side you can
adjust this using the Adjustment Wheels. Simply turn the side that has too much
Threaded Rod showing clockwise, and then turn the other side counter-clockwise. As
you so this you will see the sides equaling out as shown in Diagram E.
Diagram E .
(6)
Important: Keep these
instructions for future
reference
Gate Instructions