Filter
Top Products
7
Note :
The finished assembly should look like the image below
In order to adjust the bed rail to fit your specific bed properly, you may need to
release the strap locking buckles located on the under side of the plastic
hinges. The anchoring straps should not be twisted. If twisted, the anchoring
straps may not tighten properly.
MOUNTING THE BED RAILS TO THE BED
Step 1:
(Diagram E1)
Remove the mattress from the bed you will be mounting the double sided
bed rail to. Then, place the assembly atop the box spring or mattress support
structure so that it is positioned in the orientation of its final placement.
(Diagram D4)
(Diagram D4)
The next steps may require the assistance of an additional person