Filter
Top Products
5
Note:
Each set of corner hinges is permanently connected by an anchoring
strap. On one side of each set, the strap is adjustable. The adjustable
sides should be mounted to the same side wall assembly.
Step 7: With the walls of the bed rail completely assembled, you will now connect
them to the corner hinges and anchor straps.
(Diagram D1)
Step 8:
Insert one side of the wall frame into one of the corner hinges. Press in the
metal spring button to fully insert the tube into the hole in the plastic sleeve.
(Diagram D2)
The spring button should line up with the access hole in the plastic sleeve
on the hinge. The spring button will rebound and lock the tube in place.
(Diagram D3)
Repeat Step 7 with the other 3 corner hinges to complete the assembly.
(Diagram D1)
(Diagram D2)
Spring button
(Diagram D3)
Spring
button