Filter
Top Products
Position the Play Yard into your desired configuration (Example: Octagon, Square, etc.)
Then, join the free ends of the the Play Yard together at the plastic joints as shown in
Diagram E1 and E2.
Step 3.
Insert one of the previously removed Metal Pivot Bars through the opening created
by joining the upper plastic joints. Guide the Metal Pivot Bar downward into the
circular housing on the lower plastic joint. See Diagrams F1, F2 and F3.
Step 4.
Reassemble the upper locking joint by adding one of the previosly removed Toothed
Disks and Locking Knobs. See Diagram G1, G2 and G3.
Step 5.
6
Diagram E1
Diagram F1
Diagram G1 Diagram G2 Diagram G3
Diagram F2 Diagram F3
Diagram E2