Filter
Top Products
5
Installation Option B :
To set it up as a Play Yard enclosure.
Begin by unfolding the gate frame. To do this, simply loosen the Locking Knobs
at each pivoting joint by turning the knob counter clockwise as shown in Diagram A.
Loosen the knobs enough to allow the gate to swing open freely without fully
removing the knobs.
Step 1.
Release the vertical Metal Pivot Bars at each end of the Play Yard by removing the
following parts form the assembly:
Step 2.
Diagram D
Locking Knob (x2)
Wall Mount Toothed Disk
Metal Pivot Bar (x2)
Toothed Disk (x2)
Wall Mount
Bracket (x4)
Wall Mount Bottom Cap - Male (x4)
Wall Mount Bottom Cap - Female (x4)