Pioneer DDJ-WEGO3 Musical Toy Instrument User Manual


 
En
10
3 Deck
5 TEMPO slider
Adjusts the playing speed.
6 Loop half button
! Press:
Set the width of loop playback interval to 1/2 times.
! [SHIFT] + press:
Operations differ depending on the DJ software.*
7 AUTO LOOP mode button
! Press:
Turns the auto loop function on and off.
! [SHIFT] + press:
Operations differ depending on the DJ software.*
8 Loop double button
! Press:
Set the width of loop playback interval to 2 times.
! [SHIFT] + press:
Operations differ depending on the DJ software.*
9 FX1 button
! Press:
Turns effect 1 on and off.
! [SHIFT] + press:
Switches the effect types of FX1.
a FX2 button
! Press:
Turns effect 2 on and off.
! [SHIFT] + press:
Switches the effect types of FX2.
b FX3 button
! Press:
Turns effect 3 on and off.
! [SHIFT] + press:
Switches the effect types of FX3.
c SYNC button
! Press:
Synchronize the track tempo.
! [SHIFT] + press:
Operations differ depending on the DJ software.*
d Jog dial
0 When JOG FX mode is off
Scratch
When turned while touching a metallic part of the top of the
jog dial, the sound is played according to the direction and
speed at which the jog dial is turned.
Pitch bend
The playing speed can be adjusted by turning the outer part
of the jog dial during playback.
Search
When loading a track to each deck, turning the jog dial while
holding down the [SHIFT] button enable move to playback
position at higher speed than scratch.
0 When JOG FX mode is on
JOG FX control
Effect parameters can be adjusted by turning the jog dial.
e SHIFT button
When another button is pressed while pressing the [SHIFT] button, a
different function is called out.
f CUE button
! Press:
Sets a cue point or moves the cue point.
! [SHIFT] + press:
The playing position moves to the beginning of the track.
g Play/Pause button
Use this to play/pause tracks.
h Performance buttons
0 When in hot cue mode
Press:
Sets the hot cue point.
[SHIFT] + press:
Delete the hot cue set for that button.
0 When in sampler mode
Press:
Replays the sample sound.
[SHIFT] + press:
Operations differ depending on the DJ software.*
i HOT CUE mode indicator
Lights up when the performance buttons are in hot cue mode.
j SAMPLER mode indicator
Lights up when the performance buttons are in sampler mode.
k HOT CUE/SAMPLER mode switching button
Switches the performance button mode to hot cue mode or sampler
mode.
4 Mixer
l MIC VOL control
Adjusts the audio level input to the [MIC] terminal.
m MASTER VOL control
Adjusts the sound level output from the master.
! Not linked to [MASTER] on each DJ software screen.
n EQ (HI, MID, LOW) controls
These adjust the sound quality input to the various decks.
[HI] (treble range), [MID] (middle range), [LOW] (low range)
o HEADPHONES VOL control
Adjusts the audio level output from the [PHONES] terminal.
! Not linked to [VOL] (headphone sound volume control) on each
DJ software screen.
! The sound of the microphone connected to the [MIC] jack is not
output from the headphones.
p HEADPHONES SELECT MASTER button
Monitors the master sound over the headphones.
q HEADPHONES SELECT A/B buttons
Use this to monitor the sound of the respective decks over the
headphones.
r Channel faders
Adjusts the sound level output from the various decks.
s Crossfader
Switches the sound of the decks assigned to the left and right sides
of the crossfader for output.